Select Page

IP-based Paging and Audio Distribution System

Feature Rich, Flexible Design, Superior Sound

The Bogen C4000 Series is the perfect paging, intercom and audio distribution solution for businesses, commercial warehouses and industrial facilities. Its virtually unlimited scalability makes it ideal for communication across multiple locations. Facility managers will appreciate the accessibility from almost any web enabled device, along with the solution’s intuitive user interface.

The Bogen C4000 Series is a software-based solution for commercial paging and audio distribution applications that demand a high degree of scalability and flexibility. The heart of the C4000 solution is a powerful, state-of-the-art system controller with an easy to use Web-based Graphical User Interface (GUI) that is accessible from any PC, tablet, or mobile device. The system leverages existing LAN, WAN, and/or legacy “home-run” speaker cabling for cost-effectiveness. Feature-rich, purpose-built appliances provide audio mixing, amplification, and distribution, as well as the ability to easily integrate with third-party systems, such as PBX, access control, and fire alarm.

The C4000 solution can be scaled to support a virtually unlimited number of audio sources, end-points, and zones. Additional features and capabilities can be easily added as user’s needs change. The software platform can be easily upgraded over time to address ever-changing customer needs, environments, and technology.

The C4000 solution features a built-in, streaming Internet radio service, airable by Tune In. Business users can also access commercially licensed, customizable curated streaming music from SoundMachine, the premier music subscription service for business. Both services are perfect for a wide variety of background and/or foreground music applications. SoundMachine gives large and small retailers, restaurants, bars, or any other company looking to enhance their customer experience the ability to craft a seamless, engaging, and on-brand music experience.

C4000 IS THE PERFECT SOLUTION FOR:

  • Offices
  • Retail
  • Restaurants and bars
  • Warehouses
  • Industrial and manufacturing facilities
  • Public and private institutions
  • Healthcare facilities
  • Transportation hubs

C4000 SYSTEM HIGHLIGHTS:

  • System Controller with an intuitive user interface that is accessible from any web-enabled device
  • Networked paging amplifiers and intercom modules
  • Networked Matrix Mixer Pre-Amplifier
  • Available integrated DSP
  • Streaming media distribution (embedded airable by Tune In internet radio, and available SoundMachine music subscription service)
  • Virtually unlimited scalability
  • Easy to install, easy to use

The C4000 Series is built upon Bogen’s award-winning Nyquist software-based IP communications platform, which provides users with unparalleled flexibility and scalability in whatever their application.

AMPLIFIERS AND APPLIANCES

Feature-rich, purpose-built appliances provide audio mixing, amplification, and distribution, as well as the ability to easily integrate with third-party devices and systems, such as PBX, access control, and fire alarm. Available networked appliances include seven new audio power amplifiers, ranging from 1-channel x 20 Watts to 4-channel x 300 Watts, as well as a 4-channel matrix mixer/pre-amp. A versatile new 10-Watt plenum-rated VoIP intercom module allows users to turn any speaker into an IP speaker for even greater site design flexibility.

C4000 System Controller | NQ-SYSCTRL


Bogen’s Nyquist System Controller offers contractors a cost-effective means of deploying Nyquist based solutions using a state-of-the-art processing platform preinstalled with the Nyquist application server software. The Nyquist System Controller facilitates quick installs and offers high-performance operation for even the largest Nyquist system configurations. Developed with commercial sound in mind, the Nyquist System Controller can simultaneously distribute a virtually unlimited number of audio streams anywhere across the network, making it perfect for background music applications. The Nyquist System Controller can manage applications that require virtually any mix of multi-zone paging, intercom calling, or background music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues.

 

 

Technical Specifications

Video Display HDMI, DVI-D
Network Support Dual 10/100/1000 Mbps NICs
Protocol Support HTTP, HTTPS, UDP, RTP, FTP, TFTP, SSH, SIP2, Unicast, Multicast
Codec Support G711, G719, G722, G723, G726, G729, OPUS, Speex, a-law, µ-law, SIREN7, SIREN14, ADPCM
Connectors
                              Power 10A Line Cord C14 IEC Inlet
                         Line/MIC Input  3.5mm Line Out / 3.5mm Mic In (RESERVED FOR FUTURE USE)
                              Network 2 x RJ45
                              Misc. Outputs 4 x USB 3.0 ports, 2 x Serial ports (1 x RS232, 1 x RS232/422/485)
AC Input Voltage Range 100 VAC to 240 VAC 50/60 Hz
Maximum AC Current 1.5A
Indicators Status & Power LEDs (front) / Network LEDs (rear)
Operating Temperature Range  0˚ C to +60˚ C
Certifications Safety: CAN/CSA C22.2 No. 62368-1:2014; UL62368-1:2014; EN 62368-1:2014
EMC: FCC Part 15b Class A; ICES-003, Issue 6: 2016; EN 55032:2012; EN 55035:2017
Physical Dimensions: 1/2 Rack Width x 1RU
Single Rack Space (1RU) 8.0” W x 1.70” H x 10.25” D
(Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)

Matrix Mixer Preamp | NQ-P0100


Bogen’s Nyquist networked 4-Channel Matrix Mixer Pre-Amplifier (MMPA) offers cost-effective performance for permanent installations and commercial sound and is designed to meet the rigorous requirements of today’s sophisticated sound systems. Developed with the commercial sound contractor in mind, the MMPA provides unparalleled flexibility and versatility without the need for add-on modules. It includes state-of-the-art, built-in DSP for extensive and comprehensive signal processing–allowing users to skillfully manage and mix multiple audio input channels. The resulting audio signal mix can be directed to the MMPA’s line out or streamed over the Nyquist network, where it can be used for audio distribution to one or more zones. The MMPA fits a wide range of commercial audio applications that require multi-zone paging and/or background music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues.

Technical Specifications

MIC Input Sensitivity (Gain min./max.) Continuously variable from 0.1V to 0.006V RMS
MIC Phantom Power +15 VDC
MIC Equivalent Input Noise (EIN) 100 dB
S/N Ratio (20 kHz BW) 97 dB
Line Input Sensitivity (Gain min./max.) Continuously variable from 2V to 0.1V RMS
Line Out Bandwidth 20 Hz - 20 kHz <0.03% THD+N
Line Out Level 3 V (+10 dB)
Line Output 600-ohm electronically balanced, via 3-pin Phoenix on 6-pin Phoenix Plug/Header
THD+N @ 1 kHz <0.03%
Connectors:                                  Power Line/MIC Input     (PTT) Push-to-Talk Mic Connection   Outputs 10A Line Cord C14 IEC Inlet
Channels 1, 2 Balanced 3-pin Phoenix Plugs/Headers and balanced 3-pin Neutrik XLRs; Channel 3 Balanced 3-pin Phoenix on6-pin Phoenix Plug/Header and Balanced 3-pin Neutrik XLR; Channel 4 Balanced 3-pin Phoenix only via 6-pin Phoenix Plug/Header; RJ45; USB 2.0 Type A
DDU250 or equivalent; 500-ohm impedance with a 4-conductor cable (2 shielded); PTT dry contact switch input on pin-5 of 6-pin PhoenixPlug/Header
Line Out balanced via 3-pin Phoenix on 6-pin Phoenix Plug/Header; Streaming out via the Nyquist network
AES3 (IEC-60958 Type-I) Digital Input Channel 1 alternately functions as an AES Digital Input (110-ohm Input Impedance)
AC Input Voltage Range 85 VAC to 265 VAC 50/60 Hz
Maximum AC Current 0.6A
Indicators Status & Power LEDs (front) / Network LEDs (rear)
Operating Temperature Range -15 C to +40
DSP Based Audio Features 16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; Noise Gate; Compressor/Limiter; 7-band Parametric Equalizer
Networking Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Product Weight 2.6 lbs.
Physical Dimensions: Single Rack Space (1RU) 1/2 Rack Width x 1RU
8.0” W x 1.70” H x 8.6” D (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)

A&E Specifications

The Nyquist NQ-P0100 Matrix Mixer Pre-Amp (MMPA) shall support the following: four (4) software-selectable Mic or Line Input channels via three (3) XLR connectors and four (4) sets of screw-terminals; any single input channel shall be capable of being configured to support a Push-to-Talk microphone (e.g., Bogen DDU-250); one input shall be alternately configurable as an AES3 digital input. The MMPA shall support the following features: line-level output to drive input on a local amplifier; one (1) USB2.0 host port (Type-A connector) for future use; two (2) x RGB “full spectrum” LED status indicators. The MMPA shall include GUI based DSP controls;16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; NoiseGate; Compressor/Limiter; and 7-band Parametric Equalizer. The MMPA shall be powered by Universal mains supply (100VAC – 240VAC) and shall be wall or shelf mountable and include the required mounting bracket hardware.

Input/Output Controller | NQ-E7010


The Nyquist I/O Controller appliance provides eight (8) dry contact closure inputs to monitor events/triggers from 3rd party systems/devices such as Fire Alarms, Lockdown buttons, and sensors. It also provides eight (8) open-collector type relay driver outputs used to initiate actions such as clock correction (e.g., generating sync pulses) on 3rd party systems and devices. The outputs can also be configured via the Nyquist system software to respond to contact closure inputs from the same I/O Controller or others associated with the same Nyquist system.

• 10/100 Ethernet
• PoE Class-3 (IEEE 802.3af compliant) - Optional 48VDC 15W power supply
• 8 x dry contact closure inputs (with 1 ground per 4 inputs)
• 8 x relay driver outputs (500mA max per ground sink)
• USB 2.0 host port, Type A connector (future use)
• May be wall or shelf mounted: 5.6” W x 5.4” D x 1.7” H (2” with feet)
• Five year limited warranty

10W Plenum-rated Intercom Module | NQ-GA10P


Bogen’s plenum-rated Nyquist VoIP intercom module offers a convenient and cost-effective means of transforming any low- impedance analog speaker into a full-featured Power-over-Ethernet (PoE) IP speaker. It utilizes the latest technology to deliver superior audio quality, making it perfect for IP paging and audio distribution, while the built-in talkback capability allows it to be used in VoIP intercom applications. Designed with the commercial sound contractor in mind, its plenum-rating provides unparalleled flexibility and versatility to help simplify site design.

In addition to its wide-ranging flexibility, this intercom module uses the latest in Class D amplifier technology and provides unmatched sonic quality, exceptional reliability, and reduced power consumption to permit standalone PoE operation over the local network.

This 10-watt, single-channel, intercom module also offers a CAN bus interface to work with the NQ-E7020 Digital Call Switch and a Form-C relay for controlling third-party devices. Additionally, when paired with Bogen’s ANS500M microphone module (optional), the NQ-GA10P can be turned into an ambient noise sensor to help maintain paging and background music intelligibility in high-noise environments.

Technical Specifications

NQ-GA10P  
Power Output 10W @ 8 ohms
S/N Ratio (20k BW) 80 db
Power Output Bandwidth 20 Hz – 20 kHz < .1% THD+N
THD+N @ 1 kHz Rated Power < .05% THD+N
Rated Load Impedance 8 ohms
Frequency Response @ 1 Watt 20 Hz -20 kHz +/- 0.25 dB
Audio Amplifier Class of Operation D
External DC Power 48 – 56VDC .3A (5.5mm x 2.1mm Barrel Jack)
DC Input Range 15-Watt 48V to 56V
PoE (Power over Ethernet) IEEE 802.3af standard, Class 3 device (RJ45)
Input/Output Connector 12-pin Phoenix Plug/Header
CAN Bus Port (1) 5VDC; CH (CAN Hi); CL (CAN Low); G (Ground); Bus Speed 125 kbits/sec
Call Switch Input (2) Dry Contact Closure on Phoenix Plug Terminals G & A
Analog Speaker Connection Phoenix Plug Terminals 1 & 2
Audio Talkback Half-Duplex using the analog speaker for talkback; Phoenix Plug Terminals 1 & 2
Ambient MIC Input Ambient Noise Sensor Microphone (ANS500M); Phoenix Plug Terminals 1 & 2
Push-to-Talk Mic Connection DDU250 or equivalent; 500-ohm impedance with a 4-conductor cable (2 shielded) PTT dry contact switch on Phoenix Plug Terminals G & A; Mic audio on Phoenix plug terminals 1 & 2
Relay Contacts SPDT Rated 2A; NC (Normally Closed); Common; NO (Normally Open); G (Ground)
     
Indicators Power & Status LEDs (front) / Network LEDs (front)
Operating Temperature Range -15 C to +40 C
Protection ESD, RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
Networking Cat5 or better 10/100 network connectivity to Bogen’s Nyquist network
Certifications CE and FCC Part 15b Class A; ICES-003, Issue 6: 2016; EN 55032:2012; EN 55035:2017; UL 2043; carries NRTL Safety Mark  
Product Weight 0.7 lbs.
Physical Dimensions: 3.75” W x 7/8” H x 6.2” D (depth includes Phoenix connector)

A&E Specifications

The Nyquist based plenum-rated VoIP intercom module shall be a model (NQ-GA10P or NQ-GA10PV) rated at 10 watts RMS and shall utilize UL 2043 plenum-rated packaging. The intercom module shall be capable of being powered by either 802.3af compliant Power-over-Ethernet (PoE) switch, PoE injector, or model PS4815W 48 - 56VDC .3A (5.5mm x 2.1mm Barrel Jack) power supply when PoE isn’t available. The intercom module shall provide a frequency response @ 1 Watt 20-20 kHz +/- 0.25 dB at rated power.  Distortion shall be less than 0.03%. The intercom module shall contain one control relay output SPDT Rated 2A; NC (Normally Closed); Common; NO (Normally Open); and G (Ground). The intercom module shall be capable of supporting Digital Call Switch(es) model NQ- E7020 and/or CA-15C or CA-21B analog call switches. The intercom module shall provide support for a Bogen DDU250 Push-to-Talk microphone. Intercom modules that don’t provide Push-to-Talk microphone support shall not be considered equal. The intercom module output shall provide 8-ohm speaker output.  The NQ-GA10PV version intercom module shall contain one HDMI output supporting HDMI 1.3 (max. 1920 x 1080 @ 30 Hz) for connection to an LCD display or other visual display devices. The amplifier shall employ convection air cooling. Amplifiers that require fans for cooling shall not be considered equal.

Networked 2-Channel Power Amplifiers | NQ-A2060, NQ-A2120, NQ-A2300


Bogen’s Nyquist based networked audio power amplifiers offer cost-effective performance for permanent installations and commercial sound and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the commercial sound contractor in mind, they provide unparalleled flexibility and versatility without the need for add-on modules. They offer state-of-the-art, built-in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets, which turns the amplifier into a complete audio solution.

These 2-channel amplifiers are available in 120, 240, and 600-watt models, each with the same features to provide power and performance, no matter how large or small the application.

In addition to their extensive flexibility, the Nyquist Networked Power Amplifiers use the latest in Class D amplifier technology and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating efficiency.

Technical Specifications

    NQ-A2060 NQ-A2120 NQ-2300
Power Output 2-Ch. Mode (per Ch.)   60W @ 25V/4 ohms 120W @ 25V/4 ohms 300W @ 25V/4 ohms
Power Output 1-Ch. Bridged Mode (per Ch.)   120W @ 70V/25V/8 ohms 240W @ 70V/25V/8 ohms 600W @ 70V/25V/8 ohms
Line-In Sensitivity (Gain min./max.)   Continuously variable from 2V to 0.1V RMS
S/N Ratio (20 kHz BW)   97 dB
Power Output Bandwidth   20 Hz- 20 kHz < .03% THD+N
THD+N @ 1 kHz rated power   < .03%
Rated Load Impedance (min. per Ch.)   8 ohms Bridged / 4 ohms Non-Bridged
Frequency Response @ 1 Watt   20 Hz - 20 kHz +/- 0.25 dB
Class of Operation   Class D
Connectors        
  Power 10A Line Cord C14 IEC Inlet
  Input Balanced 3-pin Phoenix Plug/Header, Balanced 3-pin Neutrik XLR, RJ45, USB 2.0 Type A
  Output 4-pin "touch proof" Phoenix Plug/Header
Line Inputs   10k ohm electronically balanced, 3-pin Phoenix and 3-pin Neutrik XLR
AC Input Voltage Range   85 VAC to 265 VAC 50/60 Hz
Maximum AC Current   2A 3A 6A
Indicators   Status & Power LEDs (front) / Network LEDs (rear)
Operating Temperature Range   -15 C to +40 C
Thermal Emissions (Full Power)   90 BTU/hr. 135 BTU/hr. 225 BTU/hr.
Cooling   Convection
Protection   RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
DSP Based Audio Features   16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; Noise Gate; Compressor/Limiter; 7-band Parametric Equalizer
Special Features   Sleep Mode (defeatable), Power Factor Correction (PFC), 89% Amplifier Efficiency, On/Off Muting, Bridge Mode Switch
Networking   Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Product Weight   4.4 lbs. 4.4 lbs. 6.4 lbs.
Physical Dimensions:   1/2 Rack Width x 1RU* 1/2 Rack Width x 2RU**
*Single Rack Space (1RU)   8.00” W x 1.70” H x 13.48” D (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)
**Double Rack Space (2RU)   8.00” W x 3.43” H x 13.48” D (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)
     
     

 

A&E Specifications

The Nyquist based two-channel amplifier shall be a model_______, rated at_______ watts RMS per channel (NQ-A2060/2x60 watts,  NQ-A2120/2x120 watts, and NQ-A2300/2x300 watts) with switch selectable 2-Channel or 1-Channel bridged operation. The amplifier shall have one dedicated Balanced Line Input with both Phoenix plug & XLR connections. The amplifier shall provide a frequency response from 20-20 kHz +/- 0.25 dB at rated power. Distortion shall be less than 0.03%. The amplifier shall include GUI based DSP controls; 16-band Graphic Equalize; Signal Present and Clip Monitor;  Adjustable High  Pass,  Low Pass,  and  Bandpass Filters; Noise Gate; Compressor/Limiter; and 7-band Parametric Equalizer. Outputs shall be provided for 4-, 8-ohm, 25V,  and 70V distributed systems. The amplifier shall be rack mountable 1/2 Rack Width - Wall, Rack, or Shelf mountable 1RU and 2RU packages or by usinga19”Rack Mount Kit (NQ-RMK03; sold separately). It shall carry the necessary safety agency listings for both the US and Canada. The amplifier shall employ convection air cooling. Amplifiers that require fans for cooling shall not be considered equal.

 

 

 

 

 

Networked 4-Channel Power Amplifiers | NQ-A4060, NQ-A4120, NQ-A4300


Bogen’s Nyquist based networked audio power amplifiers offer cost-effective performance for permanent installations and commercial sound and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the commercial sound contractor in mind, they provide unparalleled flexibility and versatility without the need for add-on modules. They offer state-of-the-art, built-in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets, which turns the amplifier into a complete audio solution.

These 4-channel amplifiers are available in 240, 480, and 1200-watt models, each with the same features to provide power and performance, no matter how large or small the application.

In addition to their extensive flexibility, the Nyquist Networked Power Amplifiers use the latest in Class D amplifier technology and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating efficiency.

Technical Specifications

  NQ-A4060 NQ-A4120 NQ-A4300
Power Output 4-Ch. Mode(per Ch.) 60W @ 25V/4 ohms 120W @ 25V/4 ohms 300W @ 25V/4 ohms
Power Output 2-Ch. Bridged Mode (per Ch.) 120W @ 70V/25V/8 ohms 240W @ 70V/25V/8 ohms 600W @ 70V/25V/8 ohms
Line-In Sensitivity (Gain min./max.) Continuously variable from 2V to 0.1V RMS
S/N Ratio (20k BW) 97 dB
Power Output Bandwidth 20 Hz-20 kHz < .03% THD+N
THD+N @ 1 kHz rated power < .03%
Rated Load Impedance (min. per Ch.) 8 ohms Bridged / 4 ohms Non-Bridged
Frequency Response @ 1 Watt 20 Hz-20 kHz +/- 0.25 dB
Class of Operation Class D
Connectors  
Power 10A Line Cord C14 IEC Inlet 10A Line Cord C14 IEC Inlet 12A Line Cord C14 IEC Inlet
Inputs Balanced 3-pin Phoenix Plug/Header, Balanced 3-pin Neutrik XLR, RJ45, USB 2.0 Type A
Output 4-pin "touch proof" Phoenix Plug/Header
Line Inputs Two (2) 10k ohm electronically balanced, 3-pin Phoenix and 3-pin Neutrik XLR
AC Input Voltage Range 85 VAC to 265 VAC 50/60 Hz
Maximum AC Current 4A 6A 12A
Indicators Status & Power LEDs (front) / Network LEDs (rear)
Operating Temperature Range -15 C to +40 C
Thermal Emissions (Full Power) 180 BTU/hr. 270 BTU/hr. 450 BTU/hr.
Cooling Convection
Protection RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
DSP Based Audio Features 16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; Noise Gate; Compressor/Limiter; 7-band Parametric Equalizer
Special Features Sleep Mode (defeatable), Power Factor Correction (PFC), 89% Amplifier Efficiency, On/Off Muting, Bridge Mode Switch
Networking Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Product Weight 6.3 lbs. 6.3 lbs. 8.6 lbs.
Physical Dimensions: 1/2 Rack Width x 2RU*
*Double Rack Space (2RU) 8.00” W x 3.43” H x 13.48” D    (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)
   

 

A&E Specification

The Nyquist based four channel amplifier shall be a model__  , rated at_____ watts RMS per channel (NQ-A4060/4x60 watts,   NQ-A4120/4x120 watts, and NQ-A4300/4x300 watts) with switch selectable 4-Channel or 2-Channel bridged operation. The amplifier shall have two dedicated Balanced Line Inputs with both Phoenix plug and XLR connections for each input. The amplifier shall provide a frequency response from 20-20 kHz +/- 0.25 dB at rated power. Distortion shall be less than 0.03%. The amplifier shall include GUI based DSP controls; 16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; Noise Gate; Compressor/Limiter; and 7-band Parametric Equalizer. Outputs shall be provided for 4-, 8-ohm, 25V, and 70V distributed systems. The amplifier shall be rack mountable 1/2 Rack Width–Wall, Rack, or Shelf mountable 1RU and 2RU packages or by usinga19”RackMountKit(NQ-RMK03; sold separately). It shall carry the necessary safety agency listings for both the USA and Canada. The amplifier shall employ convection air cooling. Amplifiers that require fans for cooling shall not be considered equal.    

Nyquist VoIP Speakers | NQ-S1810CT (Ceiling) / NQ-S1810WT (Wall Baffle)


Nyquist VoIP ceiling and wall baffle speakers provide superior HD audio quality and seamless integration into the Nyquist ecosystem. There is no need for external amplifiers, traditional intercom wiring or transformer taps to manually set or adjust. Simply connect them via Cat5 to a PoE Switch or PoE Injector and they are ready to operate. Volume is controlled via the Nyquist GUI Dashboard. As one would expect from Bogen, the HD audio quality is superb, with excellent incoming and outgoing intelligibility. Many two-way speakers use the speaker itself as the microphone, resulting in poor outgoing audio quality. The Nyquist VoIP speakers use a separate purpose-designed MEMS digital microphone to achieve superior talkback audio.

Available Ceiling Mount Accessories: - RE84 Recessed Enclosure (back box) - TB8 Tile Bridge - MR8 Mounting Ring (for installations where the RE84 is not used)

  • 10/100 Ethernet connection
  • PoE Class-3 - no local power required (IEEE 3af compliant)
  • DHCP deployment for easy install
  • Pre-assembled for faster installation
  • 10W integrated power amp
  • MEMS digital microphone for superior talkback audio
  • CAN Bus 2.0 Interface connects to Nyquist Digital Call Switches
  • 12.8” diameter X 5” H (ceiling)
  • 2” W x 5.2” D x 10” H (wall baffle)

Digital Call Switch | NQ-E7020


The Nyquist Digital Call Switch allows users to initiate a normal, urgent, or emergency call from classrooms or other staff locations via an associated Nyquist intercom speaker. This single-gang box type wall-mounted switch uses a full spectrum LED-lit ring to confirm user actions and to indicate status (for example, changing color from a solid color to blinking), or to acknowledge a button press when a user initiates a call or when a call has been terminated. The switch is a capacitive touch type with no moving parts to jam or fail.

• CAN Bus 2.0 Interface
• Capacitive touch sensor
• Full-spectrum LED-lit ring indicates status and provides user feedback
• Single gang, low voltage installation
• Decora-style plate
• Software-defined button behavior
• Up to 256 switches can be daisy-chained for expanded functionality
• Five-year limited warranty

Bogen VoIP Phone | NQ-T1000


The Bogen NQ-T1000 VoIP staff phone (by Yealink) offers a 132x64 pixel, backlit graphical LCD display that is crisp, clear, and easy-to-use. The NQ-T1100 is a cost-effective, entry-level phone that offers rich visual information and HD Voice. It has dual 10/100 Mbps network ports with integrated PoE support for today’s modern networks.

HD Audio HD Voice refers to the combination of the phone’s software and hardware design, as well as the implementation of wideband technology to maximize acoustic performance. Coupled with advanced acoustic clarity technologies, such as full duplex operation, echo cancellation, adaptive jitter buffer, etc., the NQ-T1000 provides clearer, more life-like voice communications.

Enhanced Call Management The NQ-T1000 supports numerous productivity-enhancing features such as busy lamp field, call park, call pickup, call forward, call transfer, and 3-way conference.

Efficient Installation and Provisioning Integrated IEEE 802.3af Power-over-Ethernet capability allows easy deployment with centralized powering and backup. The NQ-T1000 supports auto-provisioning via the Nyquist server for mass deployment.

Secure Transport and Interoperability The NQ-T1100 uses SIP over Transport Layer Security (TLS/SSL), which is the latest network security technology.

Audio Features  

  • HD voice: HD handset, HD speaker
  • Wideband codec: G.722
  • Narrowband codec: G.711(A/μ), G.723.1, G.729AB,
  • DTMF: In-band, Out-of-band (RFC 2833) and SIP INFO
  • Full-duplex hands-free speakerphone with AEC

Phone Features

  • Call hold, mute, DND
  • One-touch speed dial, hotline
  • Call forward, call waiting, call transfer
  • Group listening, SMS, emergency call
  • Redial, auto answer
  • Local 3-way conferencing
  • Ring tone selection/import/delete
  • Set date time manually or automatically
  • RTCP-XR (RFC3611)

Directory

  • Local phonebook up to 1000 entries
  • Black list
  • Nyquist XML remote phonebook
  • Phonebook search/import/export
  • Call history: dialed/received/missed/forwarded

Display and Indicators

  • 132×64-pixel graphical LCD with backlight
  • LED for call and message waiting indication
  • Dual-color (red or green) illuminated LEDs for line status information
  • Intuitive user interface with icons and soft keys
  • National language selection
  • Caller ID with name, number

Feature Keys

  • 2 line keys with LED
  • 6 features keys: message, headset, redial, transfer, mute, hands-free speakerphone
  • 6 navigation keys
  • Volume control keys

Interface

  • 2 x RJ45 10/100M Ethernet ports
  • Power over Ethernet (IEEE 802.3af), Class-2
  • 1 x RJ9 handset port
  • 1 x RJ9 headset port

Management

  • Configuration: browser/phone/auto-provision
  • Auto-provisioning via Nyquist server for mass deployment
  • Phone lock for personal privacy protection
  • Reset to factory, reboot
  • Package tracing export, system log

Network and Security

  • SIP v1 (RFC2543), v2 (RFC3261)
  • NAT transverse: STUN mode
  • Proxy mode and peer-to-peer SIP link mode
  • IP assignment: static/DHCP
  • HTTP/HTTPS web server
  • Time and date synchronization using SNTP
  • UDP/TCP/DNS-SRV (RFC 3263)
  • QoS: 802.1p/Q tagging (VLAN), Layer 3 ToS
  • DSCP
  • SRTP for voice
  • Transport Layer Security (TLS)
  • HTTPS certificate manager
  • OpenVPN, IEEE802.1X
  • IPv6

Other Physical Features

  • Wall mountable
  • External universal AC adapter (optional):
    • AC 100-240V input and DC 5V/600mA output
  • Power consumption (optional AC adapter): 1.2 – 1.9W
  • Power consumption (PoE): 1.8 – 2.3W
  • Dimensions (W x D x H x T):
    • 209mm x 188mm x 150mm x 41mm
  • Operating humidity: 10% – 95%
  • Operating temperature: -10°C – 50°C

Package Contents

  • Bogen NQ-T1000 VoIP phone base unit
  • Handset with handset cord
  • Ethernet Cable (2m CAT5E UTP Cable)
  • Detachable Stand
  • Quick Start Guide

Nyquist Accessories | Rack Mount Kits and Power Supply


The following purpose-built Nyquist appliance accessories are available to help simplify system installations. Please note that all Nyquist appliances ship with mounting ears that can be used in wall-mount and rubber feet for shelf-mount applications. These mounting ears are also used in conjunction with some of the rack-mount kit accessories, so please be sure not to inadvertently discard them with the appliance packaging materials.

NQ-RMK01 | Nyquist 1U Rack Mount Kit, Type 1
This bracket works with the following Nyquist appliance combinations:
NQ-P0100 MMPA & NQ-7010 I/O Controller, NQ-SYSCTRL & NQ-7010 I/O Controller, or NQ-SYSCTRL & NQ-GA20P2 PoE-based 20W Integrated Amplifier.

NQ-RMK02 | Nyquist 1U Rack Mount Kit, Type 2
These brackets work with the following Nyquist appliances:
Any single NQ-7010 I/O Controller, or a single NQ-GA20P2 PoE-based 20W
Integrated Amplifier.

NQ-RMK03 | Nyquist 1U-2U Rack Mount Kit, Type 3
These brackets work with the following Nyquist appliance combinations:
Any single NQ-P0100 MMPA, NQ-SYSCTRL, NQ-A2xxx Power Amplifiers,
or NQ-A4xxx Power Amplifiers.

NQ-RMK04 | Nyquist Appliance Joining Bracket
This bracket kit works with the following Nyquist appliance combinations:
Any paired combination of NQ-P0100 MMPA, NQ-SYSCTRL, NQ-A2xxx Power Amplifiers, or NQ-A4xxx Power Amplifiers.

PS4815W | 48V DC, 15W Wall Plug Power Adapter
This optional external power supply works with the following Nyquist appliance:
NQ-7010 I/O Controller
(This power supply can also be used with any applicable general line Bogen product).

Contact Your Bogen Regional Sales Manager for More Information

Puerto Rico & Virgin Islands

Central & South America

National/International Accounts